Tpg Rainier Jacket

Features:

• d3o™ T3 intelligent shock absorption armor in the shoulders and elbows provides superior protection. Feel the difference! try on the new TPG Rainier, lighter, less bulky, a more comfortable, flexible fit plus the best protection in the industry
• HYPERTEX™ PLUS waterproof and breathable outer shell material keeps rain outside, but allows inside humidity to escape
• Outer shell material is 100% 600 denier nylon for abrasion resistance
• Kevlar® reinforced Teramid® underlay at the crucial first point of contact on the shoulders and elbows to keep your skin safe from the road
• Minimize the heat by utilizing 6 vents two 8" chest vents with cord locks to securely hold them open for airflow, two 9" sleeve cuff vents with 2-way zippers to volume and two 9" rear exhaust vents
• YKK® and RiRi® waterproof zippers protect all exterior vents and pockets from moisture
• Need storage? Check this out: there are 10 exterior pockets! Four front cargo, 2 chest, 2 front side (Left side contains a port for heated apparel power cord or headphones for your favorite listening device and both pockets contain cord pulls to create a wind block around the bottom of the jacket. To release the bungee, unzip the jacket from the bottom up to find the cord locks just inside.), key pocket on the left sleeve plus a large rear storage with a 13" opening. All pockets designed to deflect moisture
• Integrated in the collar is an under-the-helmet rain hood never again will water run down your neck!
• Reflective panels on the front, side, arm and back keep you visible at night
• Adjustable waist and arm straps provide a custom fit
• Drop-tail design ensures the jacket will not ride up in the sitting position
• The main front, 2-way YKK® zipper is shielded from moisture by a double storm flap with rain gutter, held in place by spring-snap closures. Inside the storm flap on the left side is a security pocket with a red slider for visibility, easy access to storage without having to unzip the jacket
• When not in use, hang your gloves on the D-ring located below the lower right pocket
• If you prefer to use an active safety device, there is a loop at the center back of the jacket for L.E.D. accessory light (Laws vary by state. Please check your local laws for any restrictions before using a light.)
• To block wind and retain warmth, sleeve cuffs and fleece-lined collar are tipped with neoprene
• Jacket-to-pant 10" full conjunction zipper fits easily through zipped liner portal and can be sewn onto your favorite pair of riding pants
• Standalone jacket included as a zip-in liner; fabric is a 3-layer laminate that is water and windproof and micro fleece-lined to retain warmth. For airflow, there are 2 chest vents that line up with the chest vents on the outer jacket.
• A Firstgear standard: inside every jacket there is a phone pocket on the left side and a map/cargo pocket on the right side. The TPG Rainier has these pockets in both the liner and the jacket. So, whether the liner is in or out, the internal pockets are in the same place

Weight, Dimensions & Additional Features

Specs

Firstgear: Men’s Jacket Sizing Guide

Measure your size in 2 easy steps

step 1. Measure Chest
Measure from under/top of one armpit, across chest to under/top of other armpit, then across back to first armpit

step 2. Measure Waist
Measure at the housrglass of your tors, (circumference measured at your belly bottom)

Note
Motorcycle apparel should have a close, snug fit, more snug then casual apparel. In order its job to (protect you), a piece of motorcycle apparel must fit snug enought that its armor will using a cloth tape...

Product Guarantee

We stand behind all the products we sell, and your satisfaction is our top priority. If you’re not satisfied with the quality of your purchase, simply send the item back to us in its original packaging, unused, within 30 days of its delivery.

Return & Exchange Policy

At our site, returns are easy! You may return new, unused, and resalable items for a refund or exchange. Simply ensure that the item is returned in its original product packaging within 30 days of delivery.